|
|
|
Publications
|
Most of our downloadable files are provided in Adobe Acrobat (PDF) format.
If you don't have Acrobat installed on your computer, or if you would like to upgrade to the latest version,
you may download a free copy of Acrobat Reader from Adobe.
|
Organizational Documents:
Field Operating Procedures (FOP's):
All FOP documents are available in both Acrobat (.pdf) and Word (.doc) file formats. They are grouped by format below.
Acrobat Versions (Go to Word Versions)
- Aggregate
- AASHTO T 2, Sampling of Aggregates (07) (Acrobat, 40 KB)
- AASHTO T 248, Reducing Samples of Aggregates to Testing Size (07) (Acrobat, 42 KB)
- AASHTO T 255, Total Moisture Content of Aggregate by Drying (07) (Acrobat, 55 KB)
- AASHTO T 27, Sieve Analysis of Fine and Coarse Aggregates (07); AASHTO T 11, Materials Finer than 75 µm (No. 200) Sieve in Mineral Aggregate by Washing (07) (Acrobat, 146 KB)
- AASHTO TP 61, Determining the Percentage of Fracture in Course Aggregate (07) (Acrobat, 50 KB)
- AASHTO T 176, Plastic Fines in Graded Aggregates and Soils by the Use of the Sand Equivalent Test (07) (Acrobat, 63 KB)
- Asphalt
- AASHTO T 168, Sampling Bituminous Paving Mixtures (07) (Acrobat, 43 KB)
- WAQTC TM 5, Reducing Samples of Hot Mix Asphalt to Testing Size (07) (Acrobat, 46 KB)
- AASHTO T 329, Moisture Content of Bituminous Mixes by Oven (07) (Acrobat, 41 KB)
- AASHTO T 308, Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (07) (Acrobat, 87 KB)
- AASHTO T 30, Mechanical Analysis of Extracted Aggregate (07) (Acrobat, 56 KB)
- AASHTO T 209, Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures (07) (Acrobat, 64 KB)
- AASHTO T 166, Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens (07); AASHTO T 275, Bulk Specific Gravity of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens (07) (Acrobat, 74 KB)
- WAQTC TM 8, In-Place Density of Bituminous Mixes Using the Nuclear Moisture-Density Gauge (07) (Acrobat, 57 KB)
- AASHTO T 40, Sampling Bituminous Materials (05) (Acrobat, 28 KB)
- Concrete
- WAQTC TM 2, Sampling Freshly Mixed Concrete (07) (Acrobat, 43 KB)
- AASHTO T 309, Temperature of Freshly Mixed Portland Cement Concrete (07) (Acrobat, 30 KB)
- AASHTO T 119, Slump of Hydraulic Cement Concrete (07) (Acrobat, 37 KB)
- AASHTO T 121, Mass Per Cubic Meter (Cubic Foot), Yield, and Air Content (Gravimetric) of Concrete (07) (Acrobat, 75 KB)
- AASHTO T 152, Air Content of Freshly Mixed Concrete by the Pressure Method (07) (Acrobat, 55 KB)
- AASHTO T 23, Making and Curing Concrete Test Specimens in the Field (07) (Acrobat, 52 KB)
- Embankment and Base
- AASHTO T 255, Total Moisture Content of Aggregate by Drying (07); AASHTO T 265, Laboratory Determination of Moisture Content of Soils (07) (Acrobat, 57 KB)
- AASHTO T 217, Determination of Moisture in Soils by Means of Calcium Carbide Gas Pressure Moisture Tester (07) (Acrobat, 70 KB)
- AASHTO T 99, Moisture Density Relations of Soils: Using a 2.5-kg (5.5-lb) Rammer and a 305 mm (12-in.) Drop (07); AASHTO T 180, Using a 4.54-kg (10-lb) Rammer and a 457 mm (18-in.) Drop (07) (Acrobat, 85 KB)
- AASHTO 272, Family of Curves -- One-Point Method (07) (Acrobat, 69 KB)
- AASHTO T 85, Specific Gravity and Absorbtion of Coarse Aggregate (07) (Acrobat, 49 KB)
- AASHTO T 224, Correction for Coarse Particles in the Soil Compaction Test (07) (Acrobat, 37 KB)
- Instruction on Use of AKDOT&PF ATM-12, ITD T-74, WSDOT TM 606, or WFLHD Humphrys Curves (04) (Acrobat, 116 KB)
- AASHTO T 310, In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth) (07) (Acrobat, 62 KB)
- AASHTO T 89, Determining the Liquid Limit of Soils (07) (Acrobat, 37 KB)
- AASHTO T 90, Determining the Plastic Limit and Plasticity Index of Soils (03) (Acrobat, 35 KB)
- In-Place Density
- Instruction on Use of AKDOT&PF ATM-12, ITD T-74, WSDOT TM 606, or WFLHD Humphrys Curves (04) (Acrobat, 116 KB)
- AASHTO T 85, Specific Gravity and Absorbtion of Coarse Aggregate (07) (Acrobat, 49 KB)
- AASHTO T 89, Determining the Liquid Limit of Soils (07) (Acrobat, 37 KB)
- AASHTO T 90, Determining the Plastic Limit and Plasticity Index of Soils (03) (Acrobat, 35 KB)
- AASHTO T 99, Moisture Density Relations of Soils: Using a 2.5-kg (5.5-lb) Rammer and a 305 mm (12-in.) Drop (07); AASHTO T 180, Using a 4.54-kg (10-lb) Rammer and a 457 mm (18-in.) Drop (07) (Acrobat, 85 KB)
- AASHTO T 166, Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens (07); AASHTO T 275, Bulk Specific Gravity of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens (07) (Acrobat, 74 KB)
- AASHTO T 209, Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures (07) (Acrobat, 64 KB)
- AASHTO T 217, Determination of Moisture in Soils by Means of Calcium Carbide Gas Pressure Moisture Tester (07) (Acrobat, 70 KB)
- AASHTO T 224, Correction for Coarse Particles in the Soil Compaction Test (07) (Acrobat, 37 KB)
- AASHTO T 255, Total Moisture Content of Aggregate by Drying (07); AASHTO T 265, Laboratory Determination of Moisture Content of Soils (07) (Acrobat, 57 KB)
- AASHTO 272, Family of Curves -- One-Point Method (07) (Acrobat, 69 KB)
- AASHTO T 310, In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth) (07) (Acrobat, 62 KB)
- WAQTC TM 8, In-Place Density of Bituminous Mixes Using the Nuclear Moisture-Density Gauge (07) (Acrobat, 57 KB)
Word Versions (Go to Acrobat Versions)
- Aggregate
- AASHTO T 2, Sampling of Aggregates (07) (Word, 70 KB)
- AASHTO T 248, Reducing Samples of Aggregates to Testing Size (07) (Word, 55 KB)
- AASHTO T 255, Total Moisture Content of Aggregate by Drying (07) (Word, 80 KB)
- AASHTO T 27, Sieve Analysis of Fine and Coarse Aggregates (07); AASHTO T 11, Materials Finer than 75 µm (No. 200) Sieve in Mineral Aggregate by Washing (07) (Word, 392 KB)
- AASHTO TP 61, Determining the Percentage of Fracture in Course Aggregate (07) (Word, 85 KB)
- AASHTO T 176, Plastic Fines in Graded Aggregates and Soils by the Use of the Sand Equivalent Test (07) (Word, 78 KB)
- Asphalt
- AASHTO T 168, Sampling Bituminous Paving Mixtures (07) (Word, 66 KB)
- WAQTC TM 5, Reducing Samples of Hot Mix Asphalt to Testing Size (07) (Word, 69 KB)
- AASHTO T 329, Moisture Content of Bituminous Mixes by Oven (07) (Word, 71 KB)
- AASHTO T 308, Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (07) (Word, 148 KB)
- AASHTO T 30, Mechanical Analysis of Extracted Aggregate (07) (Word, 128 KB)
- AASHTO T 209, Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures (07) (Word, 156 KB)
- AASHTO T 166, Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens (07); AASHTO T 275, Bulk Specific Gravity of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens (07) (Word, 103 KB)
- WAQTC TM 8, In-Place Density of Bituminous Mixes Using the Nuclear Moisture-Density Gauge (07) (Word, 79 KB)
- AASHTO T 40, Sampling Bituminous Materials (05) (Word, 43 KB)
- Concrete
- WAQTC TM 2, Sampling Freshly Mixed Concrete (07) (Word, 55 KB)
- AASHTO T 309, Temperature of Freshly Mixed Portland Cement Concrete (07) (Word, 47 KB)
- AASHTO T 119, Slump of Hydraulic Cement Concrete (07) (Word, 49 KB)
- AASHTO T 121, Mass Per Cubic Meter (Cubic Foot), Yield, and Air Content (Gravimetric) of Concrete (07) (Word, 152 KB)
- AASHTO T 152, Air Content of Freshly Mixed Concrete by the Pressure Method (07) (Word, 78 KB)
- AASHTO T 23, Making and Curing Concrete Test Specimens in the Field (07) (Word, 83 KB)
- Embankment and Base
- AASHTO T 255, Total Moisture Content of Aggregate by Drying (07); AASHTO T 265, Laboratory Determination of Moisture Content of Soils (07) (Word, 88 KB)
- AASHTO T 217, Determination of Moisture in Soils by Means of Calcium Carbide Gas Pressure Moisture Tester (07) (Word, 114 KB)
- AASHTO T 99, Moisture Density Relations of Soils: Using a 2.5-kg (5.5-lb) Rammer and a 305 mm (12-in.) Drop (07); AASHTO T 180, Using a 4.54-kg (10-lb) Rammer and a 457 mm (18-in.) Drop (07) (Word, 284 KB)
- AASHTO 272, Family of Curves -- One-Point Method (07) (Word, 211 KB)
- AASHTO T 85, Specific Gravity and Absorbtion of Coarse Aggregate (07) (Word, 79 KB)
- AASHTO T 224, Correction for Coarse Particles in the Soil Compaction Test (07) (Word, 95 KB)
- Instruction on Use of AKDOT&PF ATM-12, ITD T-74, WSDOT TM 606, or WFLHD Humphrys Curves (04) (Word, 382 KB)
- AASHTO T 310, In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth) (07) (Word, 85 KB)
- AASHTO T 89, Determining the Liquid Limit of Soils (07) (Word, 43 KB)
- AASHTO T 90, Determining the Plastic Limit and Plasticity Index of Soils (03) (Word, 44 KB)
- In-Place Density
- Instruction on Use of AKDOT&PF ATM-12, ITD T-74, WSDOT TM 606, or WFLHD Humphrys Curves (04) (Word, 382 KB)
- AASHTO T 85, Specific Gravity and Absorbtion of Coarse Aggregate (07) (Word, 79 KB)
- AASHTO T 89, Determining the Liquid Limit of Soils (07) (Word, 43 KB)
- AASHTO T 90, Determining the Plastic Limit and Plasticity Index of Soils (03) (Word, 44 KB)
- AASHTO T 99, Moisture Density Relations of Soils: Using a 2.5-kg (5.5-lb) Rammer and a 305 mm (12-in.) Drop (07); AASHTO T 180, Using a 4.54-kg (10-lb) Rammer and a 457 mm (18-in.) Drop (07) (Word, 284 KB)
- AASHTO T 166, Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens (07); AASHTO T 275, Bulk Specific Gravity of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens (07) (Word, 103 KB)
- AASHTO T 209, Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures (07) (Word, 156 KB)
- AASHTO T 217, Determination of Moisture in Soils by Means of Calcium Carbide Gas Pressure Moisture Tester (07) (Word, 114 KB)
- AASHTO T 224, Correction for Coarse Particles in the Soil Compaction Test (07) (Word, 95 KB)
- AASHTO T 255, Total Moisture Content of Aggregate by Drying (07); AASHTO T 265, Laboratory Determination of Moisture Content of Soils (07) (Word, 88 KB)
- AASHTO 272, Family of Curves -- One-Point Method (07) (Word, 211 KB)
- AASHTO T 310, In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth) (07) (Word, 85 KB)
- WAQTC TM 8, In-Place Density of Bituminous Mixes Using the Nuclear Moisture-Density Gauge (07) (Word, 79 KB)
Contact your State Coordinator to request copies of the following training materials or additional information:
- Registration, Policies, and Information Handbook: The Registration, Policies and Information Handbook is the sister document to the Administrative manual. Each agency has guidelines specific to that agency, that are not contained in the Administrative manual. See each agency for their Registration, Policies and Information Handbook
- Aggregate Instructor Guide
- Aggregate Participant Workbook
- Aggregate Computer-Based Training CD
- Asphalt Instructor Guide
- Asphalt Participant Workbook
- Asphalt Computer-Based Training CD
- Concrete Instructor Guide
- Concrete Participant Workbook
- Concrete Computer-Based Training CD
- Embankment & Base/In-Place Density Instructor Guide
- Embankment & Base/In-Place Density Participant Workbook
- Embankment & Base/In-Place Density Computer-Based Training CD
- Basics of Superpave Mix Design
|
|
Most of our downloadable files are provided in Adobe Acrobat (PDF) format.
If you don't have Acrobat installed on your computer, or if you would like to upgrade to the latest version,
you may download a free copy of Acrobat Reader from Adobe.
|
|
|
